Pond Volume Calculator: Gallons and Litres by Size

Every pond decision starts with one number: how many gallons of water it holds. This pond volume calculator turns your length, width and depth into US gallons, litres and imperial gallons, so you can size a pump, stock fish and dose treatments without guessing. Measure the pond, pick the shape, and read the result.

Pond Volume Calculator

Enter your pond's size and get the volume in US gallons, litres and imperial gallons. Works for rectangular, round and oval ponds.

Use the average depth, not the deepest point. A pond gallon figure guides pump sizing (turn the whole volume over at least once an hour), fish stocking and treatment doses.

Why pond volume is the number that matters

Three jobs depend on it. Pump and filter sizing: you want to turn the whole volume over at least once an hour, so a 1,000 gallon pond needs a pump rated near 1,000 gallons per hour at its actual head height. Stocking: koi and goldfish are heavy waste producers, and the gallon figure sets the ceiling. Treatments: pond medications and dechlorinator are dosed per gallon, and overdosing a pond you guessed at is how fish get hurt.

How to measure a pond

Measure the inside, in feet or metres, at the water line. Use the average depth, not the deepest point, because most ponds shelve from a shallow margin to a deeper middle. If the pond is 3 feet deep in the centre and 1 foot at the edges, an average near 2 feet is closer to the truth than the maximum. For a rough average, add the shallow and deep readings and halve them.

The three pond shapes

A rectangular pond is length times width times average depth. A round pond uses the diameter: the tool squares the radius, multiplies by pi and by depth. An oval pond is treated as an ellipse, using half the length and half the width. In every case the calculator multiplies cubic feet by 7.48 to reach US gallons, or works in cubic metres and converts to litres, so you never run the formula by hand.

Turning volume into a pump

Once you have the gallons, matching a pump is simple. For a goldfish pond, aim to circulate the full volume once an hour; for a koi pond, where the waste load is higher, size the pump and filter for the whole volume every hour as a floor and more if you can. Remember that a pump’s rating drops as it lifts water higher, so a pump labelled for your volume at zero height moves less once it is pushing up to a waterfall.

Stocking a pond by its gallons

Pond stocking is far lighter than people expect. A common guideline gives each koi plenty of room, often hundreds of gallons per adult fish, because a koi reaches well over a foot long and produces waste to match. Goldfish are lighter but still need real volume once they grow. Work out the gallons first, then stock conservatively, because a pond that looks empty in spring is correctly stocked by the time the fish grow into it.

Pond volume FAQ

How do I calculate the volume of my pond?

Measure length, width and average depth in feet, multiply the three together for cubic feet, then multiply by 7.48 for US gallons. For a round pond, use pi times the radius squared times the depth. This calculator does all of it, including oval ponds, from your measurements.

How many gallons is a 6×4 foot pond?

At an average depth of 2 feet, a 6 by 4 foot rectangular pond holds about 360 US gallons (6 x 4 x 2 x 7.48). Change the depth and the figure moves with it, which is why average depth is the measurement people most often get wrong.

Why use average depth instead of the deepest point?

Because the shallow shelves hold far less water than the deep centre, using the maximum depth overstates the volume, sometimes badly. An overstated volume leads to an undersized pump and overdosed treatments. The average keeps both honest.