The Estimative Index, or EI, is the simplest reliable way to feed a planted tank: dose a small surplus of nutrients so the plants are never short, then reset it with a weekly water change. This EI dosing calculator turns your tank volume and light level into a weekly schedule of dry ferts, in teaspoons and grams.
EI Dosing Calculator
Estimative Index dry dosing for planted tanks. Enter your volume and light level for a weekly schedule of KNO3, KH2PO4 and trace mix.
EI deliberately doses a small surplus so plants are never short, then resets it with a 50% water change at the end of each week. Dose macros (KNO3, KH2PO4) and micros (trace) on alternate days so they do not react in the water column.
What the Estimative Index is
EI drops the guesswork of measuring every nutrient. Instead of testing and chasing exact numbers, you add a known small excess of nitrate, phosphate, potassium and trace elements across the week, which guarantees the plants always have more than they can use. A 50 percent water change at the end of the week resets the tank so nothing builds up to a harmful level. For a high-light, CO2-injected tank, it is the standard that just works.
The three dry ferts
EI uses three cheap dry powders. KNO3, potassium nitrate, supplies nitrogen and potassium. KH2PO4, mono-potassium phosphate, supplies phosphorus. A trace mix such as CSM+B supplies iron and the micronutrients. A bag of each lasts most hobbyists a year or more, which is why EI is far cheaper than bottled all-in-one fertilisers once you are past a nano tank.
The weekly schedule
Dose macros and micros on alternate days so they do not react in the water column. A common week runs macros (KNO3 and KH2PO4 together) on Monday, Wednesday and Friday, the trace mix on Tuesday, Thursday and Saturday, and a 50 percent water change on Sunday. The calculator gives the per-dose amount; you repeat it three times that week, then reset.
Low light versus high light
A high-light tank with pressurised CO2 grows fast and eats nutrients fast, so it takes the full EI dose. A low to medium light tank without CO2 grows slowly and needs roughly half as much, because dosing full EI into a slow tank just feeds algae with the surplus the plants cannot use. Pick the level that matches your setup, and when in doubt dose lighter and watch the plants.
EI dosing FAQ
What is EI dosing in a planted tank?
Estimative Index dosing adds a deliberate small surplus of nitrate, phosphate, potassium and trace elements several times a week, then clears any build-up with a weekly 50 percent water change. It removes the need to test for each nutrient, since the plants always have enough and the water change prevents excess.
Do I need CO2 to dose EI?
Not necessarily, but you should dose less without it. Full EI suits high light plus CO2. In a low-tech tank with no CO2 and modest light, use about half the dose, or the extra nutrients simply feed algae instead of faster plant growth.
How much KNO3 should I dose?
It scales with volume and light. The calculator above works it out for your tank, but as a rough guide a high-light tank takes a fraction of a teaspoon of KNO3 per dose, three times a week, alongside smaller amounts of phosphate and trace. Start there and adjust by how the plants respond.