⚙️ Equipment

Aquarium Heater Wattage Chart: What Size for Each Tank

A submersible glass aquarium heater with a temperature dial mounted inside a tank beside a stick-on thermometer

A heater that is too weak never reaches temperature on a cold night. One that is wildly oversized can cook the tank if its thermostat ever sticks on. The safe range is about 3 to 5 watts per gallon, pushed toward the top of that band when the room runs cold. This chart gives you the watts for every common tank at a glance, then shows you how to adjust for your own room.

Aquarium heater wattage chart

TankWarm room (68°F+)Average room (60-68°F)Cold room (below 60°F)
5 gallon25 W25 W50 W
10 gallon50 W50 W75 W
20 gallon75 W100 W150 W
29 gallon100 W150 W200 W
40 gallon breeder150 W200 W2 × 150 W
55 gallon200 W250 W2 × 150 W
75 gallon300 W2 × 200 W2 × 200 W

The figures assume you are lifting the water 8 to 10 degrees above room temperature to hold a tropical 76 to 80°F. Read the full method, including where to mount the heater and how to run it safely, in the guide to sizing and placing an aquarium heater. To match a heater to your exact tank and room in one step, the aquarium heater size calculator does the arithmetic for you.

How your room changes the number

Watts heat the gap between your water and the air around it, so the colder the room, the harder the heater works. A tank in a heated living room needs far less than the same tank in an unheated basement that drops to 55°F at night. Read the chart by your coldest room temperature, not your warmest, because the heater has to hold through the cold hours. Not sure of your tank’s real volume? The fish tank sizes chart lists the gallons for every standard tank.

When to run two heaters

Once you pass 40 gallons, two smaller heaters at opposite ends beat one big unit. They spread the heat evenly across a long tank, and they cover each other: if one fails off, the other holds a partial temperature until you notice, and if one sticks on, a half-powered heater cannot cook the whole tank on its own. Split the total wattage between the two, so a 75-gallon tank runs two 200-watt heaters rather than one 400.

An empty long aquarium with two black submersible heaters mounted at opposite ends
On a tank over 40 gallons, split the wattage across two heaters at opposite ends so one stuck unit cannot cook the whole tank.

Fit it right when you set up

Mount the heater near the filter flow so moving water carries the heat around the tank. When you set the tank up, submerge the heater and leave it unplugged for 20 to 30 minutes so its thermostat matches the water before you power it on, then set the dial and confirm with a separate thermometer over the next day. Never plug in a heater that is still dry.

Common questions

What wattage heater do I need for a 10-gallon tank?

A 50-watt heater holds a 10-gallon tank at tropical temperature in most heated homes. Step up to 75 watts if the room regularly drops below 60°F.

Is 5 watts per gallon enough?

For most homes, yes. Drop toward 3 watts per gallon in a warm room, and climb to 7 or 8 in a cold one. The watt-per-gallon rule is a starting point you adjust by how cold the room gets.

Can an aquarium heater be too powerful?

A slightly oversized heater is fine and reaches temperature faster. The real risk is a stuck thermostat, and the fix is the same at any size: run a separate thermometer, and add an external controller on larger tanks.

Last updated Oct 14, 2026.

Writes Fishkeeping's beginner guides from established aquarium science.

Ellie Marsh is the byline for Fishkeeping's beginner freshwater guides, researched from aquarium science and university extension sources and written for people setting up their first tank.

More guides by this author →